System Configuration Reference

The number of connections to use for each message sender pool. For example, if a message sender pool has 20 channels and this property is set to 2, the channels are split across both connections so that each has 10 channels. To configure this property, you must manually add it to the mooms section.

Name of the zone.

Hostname and port number of the RabbitMQ broker.

Username of the RabbitMQ user. This needs to match the RabbitMQ broker configuration. If commented out, it uses the default "guest" user.

Password for the RabbitMQ user. You can choose to either have a password or an encrypted password, you cannot use both.

Encrypted password for the RabbitMQ user. You can choose to either have a password or an encrypted password, you cannot use both. See Moog Encryptor if you want to encrypt your password.

Number of threads a process can create in order to consume the messages from the Message Bus. If not specified, the thread limit = (Number of processors x 2) + 1. Altering this limit affects the performance of Moogsoft Onprem processes such as Moogfarmd and Moogpoller.

If your logs indicate an issue in creating threads, Moogsoft advises that you increase the ulimit, the maximum number of file descriptors each process can use, for the Moogsoft Onprem user. You can set this limit in /etc/security/limits.conf.

Controls whether RabbitMQ persists important messages. Message queues are durable by default and data is replicated between nodes in High Availability mode. Setting this value to false means that replicated data is not stored to disk.

Controls how many messages a process can take from the Message Bus and store in memory as a buffer for processing. This configuration allows processes to regulate message consumption which can ease backlog and memory consumption issues. The higher the number, the more messages held in the process's memory. Set to 0 for unlimited processing. To achieve high availability of messages and ensure messages are processed, the value of this should be higher than 0.

Maximum number of attempts to resend a message that failed to send. Moogsoft Onprem only attempts a retry when there is a network outage or if cache_on_failure is enabled.

You can use this in conjunction with the retry_interval property. For example, a combination of 100 maximum retries and 200 milliseconds for retry interval leads to a total of 20 seconds. The combined default value for these properties was chosen to handle the typical time for a broker failover in a clustered environment.

Maximum length of time to wait in milliseconds between each attempt to retry and send a message that failed to send.

You can use this in conjunction with the max_retries property. The combined value for these properties was chosen to handle the typical time for broker failover in a clustered environment.

Controls whether Moogsoft Onprem caches the message internally and resends it if there is an initial retry failure. The system attempts to resend any cached messages in the order they were cached until the time-to-live value, defined by the cache_ttl property, is reached.

Length of time in seconds that Moogsoft Onprem keeps cached messages in the cache list before discarding them. If a message is not successfully resent within this timeframe it is still discarded.

This defaults to 900 seconds (15 minutes). Increasing this value has a direct impact on sender process memory.

Length of time in milliseconds to wait for the Message Bus to confirm that a broker has received a message. Moogsoft does not advise changing this value.

SSL protocol you want to use. JRE 8 supports "TLSv1.2", "TLSv1.1", "TLSv1" or "SSLv3".

Path to the directory that contains the SSL certificates. You can use a relative path based upon the $MOOGSOFT_HOME directory. For example, config indicates $MOOGSOFT_HOME/config.

Enables client authentication if you provide a client certificate and key file.

Enables client authentication if you provide a client key file. The file must be in PKCS#8 format.

Host name or server name of the server that is running MySQL.

Name of the primary Moogsoft Onprem database.

Name of the Moogsoft Onprem reference database.

Name of the integrations database.

Username of the MySQL user.

Password for the MySQL user. You can choose to either have a password or an encrypted password, you cannot use both.

Encrypted password for the MySQL user. You can choose to either have a password or an encrypted password, you cannot use both. See Moog Encryptor if you want to encrypt your password.

Port that MySQL uses.

Maximum number of MySQL query retries to attempt in the event of a deadlock.

Length of time in milliseconds to wait between retry attempts.

Hosts and ports for the different servers that are connected to the main host. For example, master-master, master-slave. In the event of connection failover, the connection cannot be read-only (slave).

Path to tNohe directory that contains the trustStore you want to use for SSL connections to your MySQL database. You can use a relative path based upon the $MOOGSOFT_HOME directory. For example, config indicates $MOOGSOFT_HOME/config/truststore.

Your encrypted trustStore password. You can choose to either have a password or an encrypted password, you cannot use both. See Moog Encryptor if you want to encrypt your password.

Your trustStore password. You can choose to either have a password or an encrypted password, you cannot use both.

Length of time in milliseconds before the connection to the OpenSearch server times out.

Hosts and ports for the different OpenSearch servers connected in a cluster.

Enable or disable the persistence of the state of all Moolets in the event of a failover.

Port to connect to on each specified host in your Hazelcast cluster.

Enable for Hazelcast to attempt to connect to the next incremental available port number if the configured port is unavailable.

List of hosts that can participate in the cluster.

Specifies the cluster information that you can view in the Hazelcast Management Center UI.

Enable the stateful information from each process group to persist in a dedicated Hazelcast cluster.

Time interval in seconds at which processes report their active or passive status and check statuses of other processes.

Amount of time in seconds after keepalive_interval before Moogsoft Onprem considers processes that do not re_port their status to be dead.

Amount of time in seconds to wait for previously active process to become passive during manual failover.

Allow a passive process to automatically become active if no other active processes are detected in the same process group.

Interval in milliseconds between heartbeats sent by processes.

Number of milliseconds to wait before declaring heartbeat as missing. Defaults to 10% of the heartbeat.

Name of the process group that Moogsoft Onprem uses when it starts and stops the service.

Name of the instance for the process.

Additional identification label that appears in the UI.

Name of the process's cluster. This overrides the default cluster for a process. If left empty, the Moogsoft Onprem uses the process's default cluster.

Name of the service script that Moogsoft Onprem uses to control the process. If you do not configure a service name, Moogsoft Onprem uses the group name, removing underscores and appending a 'd'. For example, "traplam" becomes "traplamd".

Type of process. If left empty, Moogsoft Onprem calculates the type based on the group name.

Determines if the process produces a warning in the UI when it is running. Processes that are unreserved do not produce a warning.

Specifies which Moolets are reserved for the Moogfarmd process. If left empty, no Moolets are reserved for the Moogfarmd process.

Default location of the encryption key file.

Default HA cluster name.

Minimum port number in the range that the Moogsoft Onprem services use when they look for open ports.

Maximum port number in the range that the Moogsoft Onprem services use when they look for open ports.