Moogsoft Docs

Configure the Zabbix Webhook LAM

The Zabbix Webhook LAM is an endpoint for webhook notifications from Zabbix actions. The LAM parses JSON events from Zabbix into Moogsoft AIOps events.

You can install a basic Zabbix Webhook integration via the UI. See Zabbix Webhook for integration steps.

Configure the Zabbix Webhook LAM if you want to configure custom properties, set up high availability or configure advanced options that are not available in the UI integration.

Before You Begin

The Zabbix LAM has been validated with Zabbix v3.2. Before you start to set up the LAM, ensure you have met the following requirements:

  • You have an active Zabbix account with the permissions to perform the following:

    • Add custom alert scripts to the Zabbix server.

    • Create new users, media types and actions.

  • Zabbix can make requests to external endpoints over port 443. This is the default.

If you are configuring a distributed deployment refer to High Availability Overview first. You will need the details of the server configuration you are going to use for HA.

Configure the LAM

Edit the configuration file to control the behavior of the Zabbix Webhook LAM. You can find the file at $MOOGSOFT_HOME/config/zabbix_webhook_lam.conf

The Zabbix Webhook LAM is a REST-based LAM as it provides an HTTP endpoint for data ingestion. See the LAM and Integration Reference for a full description of all properties.

Some properties in the file are commented out by default. Uncomment properties to enable them.

  1. Configure the connection properties for the REST connection:

    • address: Address on the Moogsoft AIOps server that listens for REST messages. Defaults to all interfaces.

    • port: Port on the Moogsoft AIOps server that listens for REST messages. Defaults to 48013.

  2. Configure the SSL properties if you want to encrypt communications between the LAM and the REST connection:

    • use_ssl: Whether to use SSL certification.

    • path_to_ssl_files: Path to the directory that contains the SSL certificates.

    • ssl_key_filename: The SSL server key file.

    • ssl_cert_filename: The SSL root CA file.

    • ssl_protocols: Sets the allowed SSL protocols.

  3. Configure the LAM behavior:

    • num_threads: Number of worker threads to use when processing events.

    • rest_response_mode: When to send a REST response. See the LAM and Integration Reference for the options.

    • rpc_response_timeout: Number of seconds to wait for a REST response.

    • event_ack_mode: When Moogfarmd acknowledges events from the Zabbix Webhook LAM during the event processing pipeline.

    • accept_all_json: Allows the LAM to read and process all forms of JSON.

    • lists_contain_multiple_events: Whether Moogsoft AIOps interprets a JSON list as multiple events.

  4. Optionally configure the LAM identification and log file details in the agent and log_config sections of the file:

    • name: Identifies events the LAM sends to the Message Bus.

    • capture_log: Name and location of the LAM's capture log file.

    • configuration_file: Name and location of the LAM's process log configuration file.

  5. Optionally configure severity conversion. See Severity Reference for further information and "Conversion Rules" in Data Parsing for details on conversions in general.

Unsupported Properties

The Zabbix integration does not include client authentication. Do not uncomment or change the following properties:

  • use_client_certificates

  • client_ca_filename

  • auth_token or encrypted_auth_token

  • header_auth_token or encrypted_header_auth_token

  • authentication_type

  • authentication_cache


An example Zabbix Webhook LAM configuration is as follows.

    name                          : "Zabbix Webhook Lam Monitor",
    class                         : "CRestMonitor",
    port                          : 48023,
    address                       : "",
    use_ssl                       : false,
    #path_to_ssl_files            : "config",
    #ssl_key_filename             : "server.key",
    #ssl_cert_filename            : "server.pem",
    #use_client_certificates      : false,
    #client_ca_filename           : "ca.crt",
    #auth_token                   : "my_secret",
    #encrypted_auth_token         : "dfJtTQMGiFHfiq7sCmxguBt6Jv+eytkoiKCquSB/7iWxpgGsG2aez3z2j7SuBtKj",
    #header_auth_token            : "my_secret",
    #encrypted_header_auth_token  : "dfJtTQMGiFHfiq7sCmxguBt6Jv+eytkoiKCquSB/7iWxpgGsG2aez3z2j7SuBtKj",
    #ssl_protocols                : [ "TLSv1.2" ],
    authentication_type           : "none",
    authentication_cache          : true,
    accept_all_json               : true,
    lists_contain_multiple_events : true,
    num_threads                   : 5,
    rest_response_mode            : "on_receipt",
    rpc_response_timeout          : 20,
    event_ack_mode                : "queued_for_processing"
    name                          : "Zabbix Webhook",
    capture_log                   : "$MOOGSOFT_HOME/log/data-capture/zabbix_webhook_lam.log"
    configuration_file            : "$MOOGSOFT_HOME/config/logging/custom.log.json"
Configure for High Availability

Configure the Zabbix Webhook LAM for high availability if required. See High Availability Overview for details.

Configure LAMbot Processing

The Zabbix Webhook LAMbot processes and filters events before sending them to the Message Bus. You can customize or bypass this processing if required. You can also load JavaScript files into the LAMbot and execute them.

See LAMbot Configuration for more information. An example Zabbix Webhook LAM filter configuration is shown below.

    presend: "ZabbixWebhookLam.js",
    modules: [ "CommonUtils.js" ]
Start and Stop the LAM

Restart the Zabbix Webhook LAM to activate any changes you make to the configuration file or LAMbot.

The LAM service name is zabbixwebhooklamd.

See Control Moogsoft AIOps Processes for the commands to start, stop and restart the LAM.

You can use a GET request to check the status of the Zabbix Webhook LAM. See "Check the LAM Status" in Configure the REST LAM for further information and examples.

Configure Zabbix

After you have the Zabbix Webhook LAM running and listening for incoming requests, you can configure a media type and action in Zabbix. See "Configure Zabbix" in Zabbix Webhook.